CHOOSING THE RIGHT ANCHOR FOR YOUR BOAT
If you’ve just bought your first boat, you need to buy a few accessories for it, too. Among the most critical items to get is a boat anchor to suit your needs. You may need more than one. You’ll need it to stop your boat and keep it put in a particular spot. It’s especially important if you use your boat for fishing. The problem is, it’s hard to find the right anchor for your boat if you have no idea about how to choose the right one. To make matters worse, there are different anchors to choose from which adds to the confusion. But don’t worry, you just need to consider the right factors, and here are the things you must consider.
The heaviest anchor isn’t always the best choice. You should instead, focus on the actual size of the anchor. The general rule is, the bigger the anchor, the better it will resisting breaking. That’s why it’s recommended to choose the biggest one available for your boat size. The anchor’s holding capability is mostly dependent on its size and not its weight. Plus, a larger anchor is better at penetrating deeper and occupying more surface area.
TYPE OF ANCHOR
The next thing you need to consider is the type of anchor you’ll be using. There are five types of anchors: fluke, plough, claw, fisherman and mushroom.
Fluke Anchors: Otherwise known as Danforth anchors that consist of a shank and two or more hinged spades. These spades dig into the bottom when the boat pulls against it. These anchors are great for areas where the bottom consists of mud or sand. It’s a good anchor to use if you’re fishing and have to drop and haul it frequently because you can choose a lighter one. As a basis, a 15-pound fluke anchor can hold a 32-foot boat.
Plough Anchors: Plough anchors have a metal wedge attached to a shank. It’s used for anchoring in heavy grass, rocks or mud. Since plough anchors are heavy and large, they’re typically not stowed. As a basis, a 20-pound plough anchor is required to hold a 32-foot boat.
Claw Anchors: Claw anchors have multiple extensions instead of a single plough. Claw anchors work well in rocky conditions and also hold fast in mud bottoms. The good thing about a claw anchor is it lodges well and stays put even when the pull changes direction. But if you give it a vertical pull, it quickly comes loose. As a basis, a 22-pound claw anchor is required to hold a 32-foot boat.
Fisherman’s Anchor: Have you seen Popeye’s tattoo on his arm? That’s the fisherman’s anchor. These anchors are not used anymore because they are simply too heavy and inefficient. As a basis, a 75-pound fisherman’s anchor is required to hold a 32-foot boat. See what I mean?
Mushroom Anchor: Mushroom anchors are made in the shape of an upside-down mushroom with a lip around the mushroom cap. Mushroom anchors are great for soft surfaces to hold your boat while you fish, swim or relax for a few hours. They are commonly used in inflatable boats because they don’t have any sharp points. Choose mushroom anchors that are vinyl coated because they’ll do less damage to your boat when they get knocked around the hull or deck. As a basis, a 15-pound mushroom anchor can hold a 20-foot boat.
OTHER THINGS TO CONSIDER
Construction: A common choice is galvanised steel because the coating prevents rust. You can also go for stainless steel anchors. They’re more durable than the galvanised variants.
Cost: Before you buy one, compare prices from different stores. Don’t just go for the cheapest one. Always remember that you get what you pay for.
Storage: You have to consider how to store the anchor. Make sure you have enough storage space on your boat for the anchor you choose.
Using the right anchor will make your time on the water much less stressful and more enjoyable. So, make sure to base your choice according to the categories listed above. Hopefully, you’ll find the right anchor for your boat soon so you can enjoy a more relaxing time out on the waters.
Is there anything you can add? Share your thoughts below.